Dental Jewellery

Dental Jewellery

Ever noticed a sparkling jewel in someone’s smile? That is dental jewellery. U can choose from red / indigo / silver / white  and an array of colours to add that sparkle to ur smile as an accessory.

Procedure

1. The tooth is completely dried, isolated, and cleaned with a polishing paste
2. Tooth is etched with 37% orthophosphoric acid for about 30 seconds. This will improve the bonding of the jewelry to the tooth structure
3. The etchant is then rinsed off with water and the tooth is again dried for about 10 seconds
4. A light-curing bonding agent is applied on the tooth, left in place for about 20 seconds, light-cured, rinsed off and dried again.
5. Place a small amount of flow composite on the tooth surface
6. Using a small forceps, pick up the jewel to be placed on the tooth without touching with fingers. Avoid skin contact especially on the back of the jewel. Position it in the desired way and apply gentle pressure
7. The jewel should be in close contact with the enamel, pushing out the excess composite material from the tooth structure
8. While still in the dental chair, show it to the patient on a mirror and make minor adjustments if required
9. Once the final position is achieved, cure the composite thoroughly for about 60 seconds. Cure it from all side including the back of the tooth.
10. It takes about 4 minutes for the entire placement easy, is it not?